Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mountain View, CA
Installing a gate in Mountain View means planning for two very different jobs at once. Most residential parcels here date to the 1950s through 1970s, with narrow driveways, detached garages, and wood-and-metal gates hanging on aging posts, yet plenty of those same driveways back onto commuter corridors such as El Camino Real and Shoreline where an automatic gate cycles far more often than a quiet cul-de-sac gate ever would. We work on your brand, from the operator to the hardware, and we handle residential and commercial systems with the same gate-only focus. Call (888) 457-5442 for a free estimate.
Why Mountain View Homes Are Different
Mountain View’s mild, wet-winter, dry-summer climate spares gates from freeze damage but creates its own pattern of wear. Wooden swing gates swell in the winter rains and then bake and warp through long dry summers, which throws the latch out of line and strains hinges that are already decades old. Dry weather also dries out lubricant, so an operator that ran quietly in spring starts to drag by August. Morning marine fog rolling off the foothills and the damp North Bayshore marshland keep hinges, latches, and opener cabinets persistently moist, and rusted or stuck operators are a recurring call west of downtown and on the low-lying parcels near the bay. Winter storms add wind load and blown debris to lighter gate frames. Then there is the density: a gate on a narrow mid-century lot can sit a few hundred feet from a high-traffic commuter road, so it takes commercial-grade cycle counts while still needing to satisfy HOA aesthetics and residential zoning. For installation work, that combination is what drives the design decisions.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Mountain View Services
Two jobs bring most Mountain View calls our way: a gate that has stopped working, and a gate that needs to be built and automated from scratch.
Gate Repair in Mountain View
Most repair calls in Mountain View come down to hardware that has aged faster than the property around it. Sagging hinges on a 1960s wood driveway gate, a latch that no longer lines up after a wet winter, a post that has shifted, a slide gate that has jumped its track. We look at the gate structure and the mounting before touching anything else, because a hinge problem is often a post problem in disguise. Diagnostic work happens on-site, and we quote the fix before any work begins. For the full breakdown of what we handle, see Gate Repair in Mountain View.
Electric Gate Repair in Mountain View
Automated gates fail in layers. The arm or operator may be fine while the control board, a safety sensor, a keypad, or a run of buried wiring is what’s actually stopping the gate. On Mountain View properties near the bay and west of downtown, damp air gets into operator cabinets and corrodes connections, so a gate that “just stopped” often has a moisture problem inside the housing. We test the whole chain, from the operator to the hardware, rather than swapping parts and hoping. Full details are on our Electric Gate Repair in Mountain View page.
Gate Installation in Mountain View
Gate installation in Mountain View is shaped by the collision of post-war single-family lots with the dense tech-campus office parks nearby. Many gates sit on narrow, decades-old residential parcels but back onto high-traffic commuter corridors like El Camino Real and Shoreline, so automatic driveway and security gates here take commercial-grade cycle loads while being installed on residential-zoned property. That forces installs that respect both HOA aesthetics and heavy-use durability. We plan for that on the front end rather than fixing it afterward, and we quote the whole job in writing before the first post goes in. For the broader picture of how we approach new builds, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening the gate by hand every trip, the existing operator is obsolete or failing repeatedly, or the driveway sees enough daily traffic that manual operation has stopped being practical.
What it costs in Mountain View
Automatic gate installation in Mountain View typically runs from about $3,500 to $8,000, depending on gate size, operator class, and how much site work the entry needs.
How we do it
We measure the opening and check the mounting surface and power path, match an operator to the gate’s weight and expected cycle count, set posts to proper footing depth, hang the gate, then wire the operator, safety sensors, and access control and test every cycle before we leave.
Driveway Gate Installation
Signs you need it
The old gate has warped or rusted past repair, the driveway opening was never gated, or you want privacy and access control on a lot where the driveway is the only real entry point.
What it costs in Mountain View
Driveway gate installation typically falls between about $1,800 and $6,500, with wood swing gates at the lower end and wide steel or automated setups toward the top.
How we do it
We survey the driveway width, slope, and clearances, confirm the gate style against any HOA requirements, set the posts to proper footing depth for the span, hang and align the gate, then fit the hardware, latches, and any automation.
What Gate Installation Costs in Mountain View
| Item | Typical range in Mountain View |
|---|---|
| Automatic gate installation | $3,500 – $8,000 |
| Driveway gate installation | $1,800 – $6,500 |
| Gate operator replacement or new automation | $900 – $2,800 |
Do I need a permit to install a gate in Mountain View?
Often yes, especially for a taller gate, a new post footing, or electrical work for an operator. Requirements vary by parcel and zoning, so ask the city’s building department before ordering materials; we can tell you what to ask about.
Can you install a gate on a narrow mid-century driveway?
Yes. Narrow openings on older Mountain View lots are common, and they call for swing or slide hardware matched to the actual clearance rather than a stock kit. We measure the opening first, then specify the gate and operator together.
Brands We Service in Mountain View
We’re factory-familiar with nine gate and operator brands, from entry-level residential units through heavy-duty commercial systems. That includes Ghost Controls and Mighty Mule on homeowner driveways, Linear and LiftMaster on automated residential gates, and BFT, FAAC, DoorKing, Viking, and Elite on larger commercial and multi-family systems. See our brands for the full list. Parts are ordered to the job, so turnaround depends on the specific component.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mountain View, CA
These ranges are typical estimates for this market. The written estimate we give you after looking at the gate is the final price, and it’s agreed before any work starts.
| Service | Typical range in Mountain View |
|---|---|
| Driveway gate installation | $1,800 – $6,500 |
| Automatic gate installation | $3,500 – $8,000 |
| Gate operator replacement or new automation | $900 – $2,800 |
| Gate hinge, latch, and hardware repair | $150 – $450 |
| Gate post resetting or replacement | $400 – $1,200 |
| Slide gate track and roller repair | $250 – $750 |
| Electric gate diagnostic and control board repair | $200 – $650 |
| Safety sensor, keypad, and remote repair | $150 – $500 |
| Gate alignment and sag correction | $200 – $600 |
Two things push price up in Mountain View. Old posts and footings on mid-century lots often need resetting before new hardware will hold, and a high-cycle operator on a driveway that feeds a commuter corridor costs more than a light residential unit. Because the estimate is agreed before work starts, you’ll know which of those applies to your gate before anything is ordered.
Neighborhoods We Serve in Mountain View
We serve homeowners and property managers across Mountain View, from the older streets west of downtown to the newer developments on the bay side. Fog and damp air tend to hit gate hardware hardest on the lower-lying parcels, so operators and hinges there get extra attention during a diagnostic. Scheduling is arranged by appointment, and repairs are booked into the next opening from 7am to 7pm, Sunday through Friday.
- Downtown Mountain View
- North Bayshore
- Old Mountain View
- Rengstorff Park area
- Whisman
Service Area – Cities Near Mountain View
Mountain View sits in the middle of our service area, and we work the surrounding cities on the same terms: free estimates, written pricing agreed before any work, and gate-only technicians on every call. If you’re outside Mountain View, we also cover Martinez, CA, Benicia, CA, Bay Point, CA, and Pittsburg, CA. Call (888) 457-5442 to confirm coverage for your address.
Serving Mountain View, CA – Our Local Coverage Area
We serve Mountain View and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mountain View
Repairs are usually booked into the next open slot, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. Call (888) 457-5442 and we’ll give you the earliest opening for your address. Installation work is measured and scheduled separately.
HOA approval is common for street-visible gates, and city permits may apply for taller gates, new footings, or electrical work. Check both before ordering materials. We can tell you what a given design will require so you’re asking the right people the right questions.
All of Mountain View, including downtown, North Bayshore, Whisman, and the neighborhoods west of downtown. We also work the surrounding cities. Call (888) 457-5442 to confirm your address is inside the service area before booking.
Whether it’s a warped driveway gate on a 1960s lot or a high-cycle commercial operator near Shoreline, we’ll tell you what’s wrong, what it costs, and when it can be fixed. Call (888) 457-5442 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Mountain View Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Whitney Miller"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Jennifer Ackerman"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Daniela Flores